TECH TUTORIAL VIDEOS
Not sure where to start? Check out these helpful and informational videos.
Let us know if you'd like to see other tech videos that will help you. Email us at email@example.com.
QUICK LINK TO VIDEOS:
NEW BIKE UNBOXING/ASSEMBLY | SUSPENSION SET-UP | PRE-RIDE BIKE CHECK | POST-RIDE BIKE CHECK
TROUBLESHOOTING | DERAILLEUR TUNING | HOW TO SERVICE LOWER LINK ON TRAIL BIKE
HOW TO SERVICE LOWER LINK ON ENDURO BIKE | HOW TO SERVICE LOWER LINK ON DOWNHILL BIKE
REMOVING AND INSTALLING REAR AXLE | HOW TO SET-UP TUBELESS TIRES | SETTING CABLE UNDER BIKE
HOW TO USE YOUR INTENSE TORQUE WRENCH SET | INSTALLING SNIPER DU BUSHING
Unboxing / Consumer Assembly
Sweet, your bike just showed up! This video will walk you through the unpacking and initial build of your bike.
Suspension Sag Set Up
Properly set-up suspension can make or break your ride. Let's make your next ride mind-blowing.
PRE-RIDE BIKE CHECK
Don't be stuck out on a trail. Let's take a few steps to make sure your ride is going to be epic.
POST-RIDE BIKE CHECK
Was your ride a little too gnarly? Let's take some steps to check and prep for your next ride.
Did you run into some issues on the trail? Let's go over a few things that could have happened? If we didn't touch on an issue you are having, please contact us at firstname.lastname@example.org
Is your shifting as sideways as a Chris Kovarik drift? This video will quickly take you through the steps to get you dialed back in.
TRAIL - LOWERLINK SERVICE & MAINTENANCE
Want to master the inner workings of your intense? This video will guide you through both maintenance and service of your JS-Tuned Suspension trail link system.
ENDURO - LOWERLINK SERVICE & MAINTENANCE
Want to master the inner workings of your intense? This video will guide you through both maintenance and service of your JS-Tuned Suspension enduro link system.
DOWNHILL - LOWERLINK SERVICE & MAINTENANCE
Want to master the inner workings of your intense? This video will guide you through both maintenance and service of your JS-Tuned Suspension downhill link system.
Removing and installing rear axle
In this video we review how to remove and install the rear axle on your Intense bike. This is for all of our two piece axles with an expanding cone.
Tubeless tire conversion
This video will show you how to convert your mountain bike tires to tubeless. This is the fastest and easiest way. To re-use the tubes remove wheel from the bike and follow steps.
Setting cable loop under bottom bracket
In this video we show you how to properly set-up the brake and shifting cable that drop out of the front triangle and rear triangle.
Using your Intense torque wrench set
In this tech video we review the proper way of using the Intense Torque wrench set provided with all complete bikes sold.
INSTALLING NEW DU BUSHING SNIPER
In this video we review how to remove and install a new DU bushing to the shock on your Intense Sniper.
TAZER E-BIKE UNBOXING
In this video we go through unboxing and assembling your new INTENSE Tazer E-bike.